Modify Selection
- Hazards and exposures:
- Explosions
- or
- Bursts
- or
- Ignitions
Home Links
Results 41 - 50 of 122
-
7/18/2016 - Contracts and cooperative agreementsA contract to establish guidelines for mine seal design under static and dynamic loading conditions from gas and/or dust explosions within sealed areas.
-
7/18/2016 - Contracts and cooperative agreementsA capacity-building contract to examine the explosion and fire hazards in the gobs of underground longwall coal mines through physical and numerical modeling.
-
7/16/2016 - Contracts and cooperative agreementsA capacity-building contract to provide qualified individuals with opportunities to pursue MS and PhD degrees focused on ground control, research the cause of mining-induced seismicity, and improve safety in burst-prone coal mines.
-
9/22/2015 - Research areasLasers Topic Page
-
7/1/2015An article presenting an assessment of the effects that ground control mesh might have on rock and float coal dust distribution in a coal mine.
-
6/25/2015 - Peer reviewed journal articlesA paper examining the particle size distributions, specific surface areas (SSA), and the explosion suppression effectiveness of various rock dusts.
-
11/1/2014 - Peer reviewed journal articlesA study that continues research into the potential for lithium and lithium-ion battery thermal runaway from an internal short circuit in equipment for use in underground coal mines.
-
5/28/2014 - Contracts and cooperative agreementsA contract to transfer protective structure design technology from the defense establishment to the design and construction of seals in the coal industry.
-
3/4/2014 - Contracts and cooperative agreementsA contract to evaluate the role of gas desorbing on the failure of coal and the resultant influence on dynamic failures such as bumps, bursts, and outbursts.
-
12/1/2013 - Peer reviewed journal articlesSeismic monitoring provides a useful means for detection and evaluation of events resulting from mining activity.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program